MPVI2, 2+, and 3 Sync Resync

After unboxing your new MPVI2, MPVI2+, or MPVI3, it’s important to ensure the device is up to date with the latest files and firmware. The following steps will guide you through syncing and resyncing your interface for optimal performance.

---

Before You Begin

Ensure the following:

1. Your computer is connected to the Internet.
2. The latest version of VCM Suite is installed on your computer.

---

Updating Device Drivers

• For MPVI2+ and MPVI3:

  • These devices are Plug and Play on Windows 10 (or later). No manual driver updates are required.

• For MPVI2:

  1. Navigate to HP Tuners Downloads.
  2. Click on "Download MPVI2 Drivers".
  3. Unzip the downloaded file and install the drivers on your computer.

---

Syncing the Interface

1. Connect Your Device:

   • Use the USB cable to connect your MPVI2, MPVI2+, or MPVI3 to your computer.

2. Open VCM Software:

   • Launch VCM Scanner or VCM Editor.

3. Resync the Interface:

   • From the Help menu, select Resync Interface.

4. Verify Success:

   • A progress bar will indicate when the sync operation is complete.